JOINTEC GAL aluminium sliding structural joints
JOINTEC GAL aluminium sliding structural joints
JOINTEC GAL aluminium sliding expansion joints are structurally designed to bear loads of large scale buildings or building compounds. They can be installed in the interstitial space between two sections of a building or between two bays. This technical joint links these interspaces, moving three-dimensionally to accommodate a building’s structural and material settlement.
How structural joints JOINTEC GAL function
The sliding components of the profile allow horizontal movement and vertical pivoting, while eliminating the accumulation of dirt and dust. The structural bays defined by this profile should be further subdivided with smaller scale movement / expansion joints, chosen according to the expected use and flooring type.
How to install structural joints
INSTALLATION: • Assemble the profile by sliding the two horizontal elements into the lateral flanges. • Align the expansion joint using the alignment bracket provided. • Anchor the side flanges in the substrate with appropriate screws, 30cm on center, on both sides of the profile. • Lay mortar bed over the side flanges, and install the tiles as normal.
-
Jointec GAL-A in Natural Aluminum
Profile Width = 105mm, bridges a 86mm gap. This extruded aluminium profile offers good resistance to chemical and mechanical stress and wear. Use on floor installations. JOINTEC GM brass profiles are recommended for outdoor use.
Aluminum / Natural
BxH (mm) Art. 20 GAL 200 AN 50 GAL 500 AN 70 GAL 700 AN
Related products
Select items and add them to the quotation list
Select the product to request a quote
| Article | Material | Finishing | Color | Installazione | BxH (mm) | |
|---|---|---|---|---|---|---|
|
|