FOILTEC waterproofing membrane
FOILTEC waterproofing membrane
WATER-STOP FOILTEC waterproof membrane in laminated polyethylene is conceived for environments with high humidity, to be installed simultaneously with the tile, using the appropriate tile adhesive. It is particularly suitable in shower stalls, preventing humidity from spreading to adjacent rooms.
FOILTEC has been tested with vapor test prooving high resistance making it a great option not only for waterproofing installations but also in steam wet rooms.
FOILTEC/15 Joint sealing strip in laminated polyethylene. Width: 15cm. FOILTEC/I/G Internal corner joint in preformed, laminated polyethylene. FOILTEC/E/G External corner joint in preformed, laminated polyethylene. FOILTEC/T20/G Pipe joint in preformed, laminated polyethylene.
FOILTEC dimensions options
INSTALLATION: Assure base is level, smooth, clean and dry. Apply adhesive using a 3x3mm “V” notched trowel. Apply WATER-STOP FOILTEC membrane with the flat edge of the trowel, pressing firmly to smooth out bubbles. Overlap sections of the membrane by 5cm, or use WATER-STOP FOILTEC/15 strips to seal joints. To guarantee waterproofing, use WATER-STOP preformed internal / external corner joints and pipe joints.
-
Water-stop FOILTEC - Polyethylene membrane
Polyethylene insulating membrane coupled on two sides, compatible with tile adhesive. Supplied in rolls of different sizes. Bandella (/ 15), internal corners (/ I / G), external corners (/ E / G) and pipe fittings (/ T20 / G) available.
Polyethylene /
BxL (mm) Art. 1 x 30 FOILTEC /05 /G 1 x 5 FOILTEC /05/5 /G 0,5 FOILTEC /05/10 /G -
Foiltec BENCHSET
The range of FOILTEC waterproofing membranes now includes a new set of 4 pre-formed corners, which, in showers and other bathroom areas, fit perfectly into the 135° angles formed by the connection between benche and floor and wall. The set includes 2 inside 135° corners to waterproof the floor corners, and a left and a right top corner for the upper part of the seat. In both cases the corners must be completed with a section of FOILTEC/15 waterproofing strip, overlapping a waterproofing membrane of at least 5 cm.
Foiltec / I / G, angular Preformed internal waterproofing of the Foiltec membrane
Waterstop Foiltec / I / G membrane, internal pre-formed waterproofing corner in coupled polyethylene.Provide water-resistant adhesives using a notched trowel, then press with adequate pressure with the smooth part of the trowel and make the membrane adhere to the support avoiding the formation of air bubbles possibly with the help of the pressure roller. The internal corner is usually used to perfect the laying of the Waterstop Foiltec Roll membrane, and is ideal for a workmanlike result.
Foiltec / E / G, corner Preformed external waterproofing of the Foiltec membrane
Waterstop Foiltec / I / G membrane, external pre-formed waterproofing corner in coupled polyethylene.Provide water-resistant adhesives using a notched trowel, then press with adequate pressure with the smooth part of the trowel and make the membrane adhere to the support avoiding the formation of air bubbles possibly with the help of the pressure roller. The external corner is usually used to perfect the laying of the Waterstop Foiltec Roll membrane.
Foiltec / T20 / G, fitting for preformed waterproofing pipes of the Foiltec membrane
Waterstop Foiltec / T20 / G membrane, pre-formed waterproofing pipe connection in coupled polyethylene.Provide water-resistant adhesives using a notched trowel, then press with adequate pressure with the smooth part of the trowel and make the membrane adhere to the support avoiding the formation of air bubbles possibly with the help of the pressure roller. the pipe fitting is usually used to perfect the laying of the Waterstop Foiltec Roll membrane, and is ideal for a workmanlike result.
Related products
Select items and add them to the quotation list
Select the product to request a quote
| Article | Material | Finishing | Color | Installazione | BxL (mm) | |
|---|---|---|---|---|---|---|
|
|