STL-TRAY Pre-sloped shower tray for Showertec Linear system
STL-TRAY Pre-sloped shower tray for Showertec Linear system
Showertec STL - TRAY are a family of pre-sloped shower trays compatible with Showertec linear STL BS and Showertec linear STL BV and STL BC (height from 9/16" to 1-15/32" - 15 to 37 mm). They are made of waterproof material and thanks to the reinforcement grid and the honeycomb surface finish they are very resistant and allow a solid bond between the cement glue and the tile. Available in 36"/44" - 91/112 cm and 52"/44" - 132/112 cm versions, they can be combined with 36"/22" - 91/56 cm and 52"/22" - 132/56 cm extensions and also in combination with the 2 3/32" - 53 mm raised panel to form the STL-TRAY-R panel.
Accessories
Showertec Linear STL-EXT, prepaid extension to be combined with the Showertec Linear TRAY shower tray
Extension (EXTENSION) sloped and waterproof for shower tray (TRAY). Available in the SMALL or STANDARD version, the extension allows to extend the shower tray by 22" (56 cm), maintaining a 2% inclination in continuity with the trays. Made of XPS covered with fiber-reinforced concrete.
Showertec Linear STL-RAMP, ramp to be combined with the Showertec Linear TRAY shower tray (without risers or extensions)
Ramp (RAMP) pre-licensed and waterproof compatible only with TRAY shower trays (without riser or extensions). Made of XPS and covered in fiber-reinforced concrete, it provides an inclination of 10% over a length of 12" (32 cm).
Related products
showertec STL TRAY-R
Showertec Linear TRAY-R, pre-slope shower tray with riser
showertec STL B
Showertec Linear, linear drain with horizontal outlet, version with LOW and STANDARD height
showertec STL BV
Showertec Linear, linear drain with vertical drain
foiltec
FOILTEC waterproofing membrane
foiltec 15
The Foiltec waterproof joint tape
profile KV
KV glass holder profiles for shower floors
profile KPV