JOUNTEC GALP structural joints with expansion
JOUNTEC GALP structural joints with expansion
JOINTEC GALP aluminium sliding expansion joints are structurally designed to bear loads of large scale buildings or building compounds in wall-to-floor junctions. Installed in the interstitial space between two sections of a building, this technical joint links interspaces, moving three-dimensionally to accommodate a building’s structural and material settlement. The vertical anchoring flange can be installed facing upwards or downwards on the wall, as necessary.
JOUNTEC GALP joints functions
The sliding components of the profile allow horizontal movement and vertical pivoting, while eliminating the accumulation of dirt and dust. The structural bays defined by this profile should be further subdivided with smaller scale movement / expansion joints, chosen according to the expected use and flooring type.
How to install structural joints
INSTALLATION: • Assemble the profile by sliding the two horizontal elements into the lateral flanges. • Carefully align the expansion joint. • Anchor the side flanges in the substrate with appropriate screws, 30cm on center, on both sides of the profile. • Lay mortar bed over the side flanges, and install the tiles as normal.
-
Jointec GALP-A in Natural Aluminum
Profile Width = 105mm, bridges a 86mm gap This extruded aluminium profile offers good resistance to chemical and mechanical stress and wear. Use in wall-to-floor transitions. JOINTEC GM brass profiles are recommended for outdoor use.
Aluminum / Natural
B (mm) Art. 20 GALP 200 AN 50 GALP 500 AN 70 GALP 700 AN
Related products
Select items and add them to the quotation list
Select the product to request a quote
| Article | Material | Finishing | Color | Installazione | B (mm) | |
|---|---|---|---|---|---|---|
|
|